Dell Force10 MXL Blade Reference Manual page 406

Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
router-id
Syntax
Parameters
Defaults
Command Modes
Command
History
Example
406 | Open Shortest Path First (OSPFv2)
metric-type
type-value
map-name
route-map
tag-value
tag
Not configured.
ROUTER OSPF
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
To redistribute the default route (0.0.0.0/0), configure the
default-information originate
Use this command to configure a fixed router ID.
router-id ip-address
To remove the fixed router ID, use the no router-id
ip-address
none
ROUTER OSPF
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Figure 21-2. router-id Command Example
FTOS(conf)#router ospf
FTOS(conf-router_ospf)#router-id 1.1.1.1
Changing router-id will bring down existing OSPF adjacency [y/n]:
FTOS(conf-router_ospf)#show config
!
router ospf 100
router-id 1.1.1.1
FTOS(conf-router_ospf)#no router-id
Changing router-id will bring down existing OSPF adjacency [y/n]:
FTOS#
(OPTIONAL) Enter the keyword
following:
• 1 = OSPF External type 1
• 2 = OSPF External type 2
(OPTIONAL) Enter the keyword
route map.
(OPTIONAL) Enter the keyword
Range: 0 to 4294967295
Generates a default route into the OSPF routing domain.
ip-address
Enter the router ID in the IP address format
100
metric-type
followed by one of the
route-map
followed by the name of the
tag
followed by a number.
default-information originate
command.
command.