Interface Loopback; Interface Managementethernet - Dell Force10 MXL Blade Reference Manual

interface loopback

Syntax
Parameters
Defaults
Command Modes
Command
History
Example
Related
Commands

interface ManagementEthernet

Syntax
Parameters
Defaults
Command Modes
Command
History
Example
Usage
Information
244 | Interfaces
Configure a Loopback interface.
interface loopback number
To remove a loopback interface, use the no interface loopback
number
Enter a number as the interface number.
Range: 0 to 16383.
Not configured.
CONFIGURATION
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Figure 14-8. interface loopback Command Example
FTOS(conf)#interface loopback 1655
FTOS(conf-if-lo-1655)#
interface
interface null
interface port-channel
interface vlan
Configure the Management port on the system.
interface ManagementEthernet slot/port
slot/port
Enter the keyword
number zero (0).
Not configured.
CONFIGURATION
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Figure 14-9. interface ManagementEthernet Command Example
FTOS(conf)#interface managementethernet 0/0
FTOS(conf-if-ma-0/0)#
You cannot delete a Management port.
Configures a physical interface.
Configures a Null interface.
Configures a port channel.
Configures a VLAN.
ManagementEthernet
followed by slot number (0-1) and port
number command.