Ip Poison-Reverse - Dell Force10 MXL Blade Reference Manual

Related
Commands
distribute-list out
Syntax
Parameters
Defaults
Command Modes
Command History
Related
Commands

ip poison-reverse

Syntax
Defaults
Command Modes
Command
History
496 | Routing Information Protocol (RIP)
ip prefix-list Enters PREFIX-LIST mode and configures a prefix list.
Configure a filter for outgoing routing updates.
distribute-list prefix-list-name out [ interface | bgp | connected | ospf | static ]
To delete the filter, use the no distribute-list
prefix list-name
- Enter the name of a configured prefix list.
interface (OPTIONAL) Identifies the interface type slot/port as one of the following:
•
•
•
•
connected
(OPTIONAL) Enter the keyword
routes.
ospf
(OPTIONAL) Enter the keyword
static
(OPTIONAL) Enter the keyword
Not configured.
ROUTER RIP
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
ip prefix-list Enters PREFIX-LIST mode and configures a prefix list.
Set the prefix of the RIP routing updates to the RIP infinity value.
ip poison-reverse
To disable poison reverse, use the no ip poison-reverse command.
Disabled.
INTERFACE
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
prefix-list-name out
For a Port Channel interface, enter the keyword
number:
Range: 1 to 128
For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
For a 40-Gigabit Ethernet interface, enter the keyword
the slot/port information.
For a VLAN, enter the keyword
connected
ospf
static
command.
port-channel
TenGigabitEthernet
fortyGigE
vlan
followed by a number from 1 to 4094.
to filter only directly connected
to filter all OSPF routes.
to filter manually configured routes.
followed by a
followed by