Show Dcb; Show Interface Dcbx Detail - Dell Force10 MXL Blade Reference Manual

show dcb

Syntax
Parameters
Command Mode
Command
History
Example
Usage
Information

show interface dcbx detail

Syntax
Parameters
Command Mode
Command
History
172 | Data Center Bridging
Displays the data center bridging status, the number of PFC-enabled ports, and the number of
PFC-enabled queues.
show dcb [stack-unit unit-number]
unit number Enter the DCB unit number.
The valid values are 0 to 5.
EXEC PRIVILEGE
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Figure 9-1. show dcb Command Example
FTOS# show dcb
stack-unit 0 port-set 0
DCB Status : Enabled
PFC Port Count : 56 (current), 56 (configured)
PFC Queue Count : 2 (current), 2 (configured)
Specify a stack-unit number on the Master switch in a stack.
Displays the DCBX configuration on an interface.
show interface port-type slot/port dcbx detail
port-type Enter the port type.
slot/port Enter the slot/port number.
CONFIGURATION
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module