Clear Dampening - Dell Force10 MXL Blade Reference Manual

Example Figure 14-1. clear counters Command Example
FTOS#clear counters
Clear counters on all interfaces [confirm]
Related
mac learning-limit
Commands
show interfaces

clear dampening

Clear the dampening counters on all the interfaces or just the specified interface.
Syntax clear dampening [ interface ]
Parameters
interface
Defaults
Without a specific interface specified, the command clears all interface dampening counters
Command Modes
EXEC Privilege
Command
Version 8.3.16.1
History
Usage On the MXL Switch, after you enter the clear counters command and verify the results with the show
Information
interfaces command, the line rate is not reset to 0.00%.
Example Figure 14-2. clear dampening Command Example
FTOS#clear dampening tengigabitethernet 1/2
Clear dampening counters on tengig 1/2 [confirm] y
FTOS#
Related
show interfaces dampening
Commands
dampening
cx4-cable-length
Configure the length of the cable to be connected to the selected CX4 port.
[no] cx4-cable-length {long | medium | short}
Syntax
Limit the maximum number of MAC addresses (static + dynamic) learned on a
selected interface.
Display information on a specific physical interface or virtual interface.
(OPTIONAL) Enter one of the following keywords and slot/port or number
information:
• For a Port Channel interface, enter the keyword
by a number. Range: 1 to 128.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
• For a 40-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
Introduced on MXL 10/40GbE Switch IO Module
Displays interface dampening information.
Configures dampening on an interface.
port-channel
followed by the slot/port information.
followed
fortyGigE
Interfaces | 237