Dell Force10 MXL Blade Reference Manual page 174

Usage
Information
174 | Data Center Bridging
Table 9-2. show interface dcbx detail Command Example Fields (continued)
Field Description
Local DCBX Configured DCBX version configured on the port: CEE, CIN, IEEE v2.5, or Auto (port
mode auto-configures to use the DCBX version received from a peer).
Peer Operating version DCBX version that the peer uses to exchange DCB parameters.
Local DCBX TLVs Transmission status (enabled or disabled) of advertised DCB TLVs (see TLV code
Transmitted at the top of the show command output).
Local DCBX Status: DCBX version advertised in Control TLVs.
DCBX Operational
Version
Local DCBX Status: Highest DCBX version supported in Control TLVs.
DCBX Max Version
Supported
Local DCBX Status: Sequence number transmitted in Control TLVs.
Sequence Number
Local DCBX Status: Acknowledgement number transmitted in Control TLVs.
Acknowledgment
Number
Local DCBX Status: Current operational state of the DCBX protocol: ACK or IN-SYNC.
Protocol State
Peer DCBX Status: DCBX version advertised in Control TLVs received from the peer device.
DCBX Operational
Version
Peer DCBX Status: Highest DCBX version supported in Control TLVs received from the peer device.
DCBX Max Version
Supported
Peer DCBX Status: Sequence number transmitted in Control TLVs received from the peer device.
Sequence Number
Peer DCBX Status: Acknowledgement number transmitted in Control TLVs received from the peer
Acknowledgment device.
Number
Total DCBX Frames Number of DCBX frames sent from the local port.
transmitted
Total DCBX Frames Number of DCBX frames received from the remote peer port.
received
Total DCBX Frame errors Number of DCBX frames with errors received.
Total DCBX Frames Number of unrecognizable DCBX frames received.
unrecognized
To clear DCBX frame counters, use the clear dcbx counters interface stack-unit/port command.