Show Ip Udp-Helper - Dell Force10 MXL Blade Reference Manual

Related
Commands

show ip udp-helper

Syntax
Defaults
Command Modes
Example
Command
History
Related
Commands
288 | Interfaces
ip helper-address
debug ip udp-helper
show ip udp-helper
Display the configured UDP helper(s) on all interfaces.
show ip udp-helper
none
EXEC
Figure 14-46. show ip udp-helper Command Example
FTOS#show ip udp-helper
--------------------------------------------------
Port UDP port list
--------------------------------------------------
TenGig 10/0 656, 658
TenGig 10/1 All
Version 8.3.16.1
debug ip udp-helper
ip udp-broadcast-address
ip udp-helper udp-port
Configures the destination broadcast or host address for DHCP server.
Enables debug and display the debug information on a console.
Displays the configured UDP helper(s) on all interfaces.
Introduced on MXL 10/40GbE Switch IO Module
Enables debug and display the debug information on a console.
Configures a UDP IP address for broadcast.
Enables the UDP broadcast feature on an interface either for all UDP ports or
a specified list of UDP ports.