Area Range; Area Stub - Dell Force10 MXL Blade Reference Manual

area range

Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands

area stub

Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
388 | Open Shortest Path First (OSPFv2)
Summarize routes matching an address/mask at an area border router (ABR).
area area-id range ip-address mask [ not-advertise ]
To disable route summarization, use the no area
area-id
Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a number from
zero (0) to 65535.
ip-address
Specify an IP address in dotted decimal format.
mask Specify a mask for the destination prefix. Enter the full mask (for example,
255.255.255.0).
not-advertise
(OPTIONAL) Enter the keyword
(that is, the Type 3 summary-LSA is suppressed and the component networks remain
hidden from other areas.)
No range is configured.
ROUTER OSPF
Version 8.3.16.1
Only the routes within an area are summarized, and that summary is advertised to other areas by the
ABR. External routes are not summarized.
area stub Creates a stub area.
router ospf Enters ROUTER OSPF mode to configure an OSPF instance.
Configure a stub area, which is an area not connected to other areas.
area area-id stub [ no-summary ]
To delete a stub area, use the no area
area-id
Specify the stub area in dotted decimal format (A.B.C.D.) or enter a number from zero
(0) to 65535.
no-summary
(OPTIONAL) Enter the keyword
summary Link State Advertisements (LSAs) into the stub area.
Disabled
ROUTER OSPF
Version 8.3.16.1
Use this command to configure all routers and access servers within a stub.
area-id range ip-address mask
not-advertise
Introduced on MXL 10/40GbE Switch IO Module
area-id stub command.
no-summary
Introduced on MXL 10/40GbE Switch IO Module
command.
to set the status to DoNotAdvertise
to prevent the ABR from sending