Dell Force10 MXL Blade Reference Manual page 501

passive-interface
Suppress routing updates on a specified interface.
Syntax passive-interface interface
To delete a passive interface, use the no passive-interface interface command.
Parameters
interface
Defaults Not configured.
Command Modes
ROUTER RIP
Command History
Version 8.3.16.1
Usage Information
Although the passive interface neither sends nor receives routing updates, the network on that interface
is still included in RIP updates sent via other interfaces.
Related
neighbor
Commands
network
redistribute
Redistribute information from other routing instances.
Syntax redistribute { connected | static }
To disable redistribution, use the no redistribute { connected | static } command.
Parameters
connected
static
Defaults Not configured.
Command Modes
ROUTER RIP
Command
Version 8.3.16.1
History
Usage
To redistribute the default route (0.0.0.0/0), configure the
Information
Enter the following information:
• For a Port Channel interface, enter the keyword
Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
slot/port information.
• For a VLAN, enter the keyword
Introduced on MXL 10/40GbE Switch IO Module
Enables RIP for a specified network.
Defines a neighbor.
connected
Enter the keyword
is redistributed.
static
Enter the keyword to specify that information from static routes is redistributed.
Introduced on MXL 10/40GbE Switch IO Module
port-channel
TenGigabitEthernet
fortyGigE
vlan
followed by a number from 1 to 4094.
to specify that information from active routes on interfaces
default-information originate
Routing Information Protocol (RIP) | 501
followed by a number:
followed by the
command.