Mac-Address-Table Aging-Time; Mac-Address-Table Static - Dell Force10 MXL Blade Reference Manual

Command Modes
Command
History

mac-address-table aging-time

Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands

mac-address-table static

Syntax
338 | Layer 2
interface interface
vlan vlan-id
EXEC Privilege
Version 8.3.16.1
Specify an aging time for MAC addresses to be removed from the MAC Address Table.
mac-address-table aging-time seconds
seconds Enter either zero (0) or a number as the number of seconds before MAC addresses are
relearned. To disable aging of the MAC address table, enter 0.
Range: 10 - 1000000
Default: 1800 seconds
1800 seconds
CONFIGURATION
Version 8.3.16.1
mac learning-limit
show mac-address-table aging-time
Associate specific MAC or hardware addresses to an interface and VLANs.
mac-address-table static mac-address output interface vlan vlan-id
To remove a MAC address, use the no mac-address-table static mac-address output
vlan-id command.
Enter the following keywords and slot/port or number information:
• For a Port Channel interface, enter the keyword
by a number:
Range: 1 to 128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
vlan
Enter the keyword followed by a VLAN ID number from 1 to 4094.
Introduced on MXL 10/40GbE Switch IO Module
Introduced on MXL 10/40GbE Switch IO Module
Sets the MAC address learning limits for a selected interface.
Displays the MAC aging time.
port-channel
followed
fortyGigE
interface vlan