Default Gateway - Dell Force10 MXL Blade Reference Manual

Ftos command line reference guide for the mxl 10/40gbe switch io module
Hide thumbs Also See for Force10 MXL Blade:
Table of Contents

Advertisement

boot write net config retries
Set the number of retries for network boot configuration failure.
boot write net config retries <int>
Syntax
Command Modes
uBoot
Command
Version 8.3.16.1
History
u
Example
Figure 5-2. boot write net config retries Command Example
BOOT_USER # boot write net config retries 2
Updated number of Network Boot Config retries to 2.
BOOT_USER #
boot zero
Clears the primary, secondary, or default boot parameters.
Syntax
boot zero [primary | secondary | default]
Command Modes
uBoot
Command
Version 8.3.16.1
History
u

default gateway

Set the default gateway IP address.
Syntax
default-gateway <ip-address>
Command Modes
uBoot
Command
Version 8.3.16.1
History
u
enable
Change the access privilege level.
Syntax
enable [user | admin]
Command Modes
uBoot
Command
Version 8.3.16.1
History
u
Introduced on MXL 10/40GbE Switch IO Module
Introduced on MXL 10/40GbE Switch IO Module
Introduced on MXL 10/40GbE Switch IO Module
Introduced on MXL 10/40GbE Switch IO Module
u-Boot | 83

Advertisement

Table of Contents
loading

Table of Contents