Service-Policy Input; Service-Policy Output - Dell Force10 MXL Blade Reference Manual

Ftos command line reference guide for the mxl 10/40gbe switch io module
Hide thumbs Also See for Force10 MXL Blade:
Table of Contents

Advertisement

service-policy input

Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands

service-policy output

Syntax
Parameters
Defaults
Command Modes
Command
History
478
|
Quality of Service (QoS)
Apply an input policy map to the selected interface.
service-policy input policy-map-name [ layer2 ]
To remove the input policy map from the interface, use the no service-policy input
[ layer2 ] command.
policy-map-name
layer2
Layer 3
INTERFACE
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module
A single policy-map can be attached to one or more interfaces to specify the service-policy for those
interfaces. A policy map attached to an interface can be modified.
Note:
The service-policy commands are not allowed on a port channel.
service-policy input policy-map-name
The
command are not allowed simultaneously on an interface.
policy-map-input
Apply an output policy map to the selected interface.
service-policy output policy-map-name
To remove the output policy map from the interface, use the no service-policy output
policy-map-name
command.
policy-map-name
none
INTERFACE
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module
Enter the name for the policy map in character format (16 characters
You can identify an existing
maximum).
exist.
does not yet
(OPTIONAL) Enter the keyword
Default: Layer 3
command and the
Creates an input policy map.
Enter the name for the policy map in character format (16 characters
You can identify an existing
maximum).
exist.
does not yet
policy-map-name
policy map or name one that
layer2
to specify a Layer 2 Class Map.
service-class dynamic dot1p
policy map or name one that

Advertisement

Table of Contents
loading

Table of Contents