Debug Ntp; Ntp Authenticate - Dell Force10 MXL Blade Reference Manual

debug ntp

Display NTP transactions and protocol messages for troubleshooting.
Syntax
debug ntp
To disable debugging of NTP transactions, use the no debug ntp { adjust | all | authentication | events |
loopfilter
Parameters
adjust
all
authentication
events
loopfilter
packets
select
sync
Command Modes
EXEC Privilege
Command
Version 8.3.16.1
History

ntp authenticate

Enable authentication of NTP traffic between the switch and the NTP time serving hosts.
Syntax ntp authenticate
To disable NTP authentication, use the no ntp authentication command.
Defaults
Not enabled.
Command Modes CONFIGURATION
Command
Version 8.3.16.1
History
Usage You also must configure an authentication key for NTP traffic using the
Information
command.
Related
ntp authentication-key
Commands
ntp trusted-key
{ adjust | all | authentication | events | loopfilter | packets | select | sync }
| packets | select | sync } command.
Enter the keyword
Enter the keyword
Enter the keyword
transactions.
Enter the keyword
Enter the keyword
Enter the keyword
Enter the keyword
Enter the keyword
Introduced on MXL 10/40GbE Switch IO Module
Introduced on MXL 10/40GbE Switch IO Module
adjust to display information on NTP clock adjustments.
all
to display information on all NTP transactions.
authentication
to display information on NTP authentication
events to display information on NTP events.
loopfilter
to display information on NTP local clock frequency.
packets
to display information on NTP packets.
select to display information on the NTP clock selection.
sync to display information on the NTP clock synchronization.
Configures the authentication key for NTP traffic.
Configures a key to authenticate.
ntp authentication-key
System Time and Date | 637