Dell Force10 MXL Blade Reference Manual page 617

Table 33-1. show system stack-ports Command Description
Field
Topology
Interface
Link Speed
Admin
Status
Connection
Related
redundancy
Commands
disable-auto-reboot
show hardware stack-unit
show system
show system stack-unit stack-group
Display the stack-groups present/configured for a MXL 10/40GbE switch stack unit.
Syntax show system stack-unit <unit-number> stack-group [configured]
Parameters
unit number
<0-5>
Command Modes EXEC Privilege
Command
Version 8.3.16.1
History
Related
reload
Commands
show system
stack-unit stack group
Configure a 40GbE port for stacking mode.
Syntax stack-unit <unit number> stack-group <group number>
Parameters
unit number
<0-5>
group number
<0-5>
Command Modes CONFIGURATION
Description
Lists the topology of stack ports connected: Ring, Daisy chain, or Standalone
The unit/port ID of the connected stack port on this unit
Link Speed of the stack port in Gb/s
The only currently listed status is Up.
The stack port ID to which this unit's stack port is connected
Resets the designated stack member.
Displays the data plane or management plane input and output statistics of the
designated component of the designated stack member.
Displays the current status of all stack members or a specific member.
Upgrades the system image of the management unit.
Number of the member stack unit. Valid values: 0 to 5. Default: 0.
Introduced on MXL 10/40GbE Switch IO Module
Reboots FTOS.
Displays the current status of all stack members or a specific member.
Number of the member stack unit. Valid values: 0 to 5.
Number of the stacked port on the unit. Valid values: 0 to 5.
Stacking Commands | 617