Ip Split-Horizon - Dell Force10 MXL Blade Reference Manual

Related
Commands

ip split-horizon

Syntax
Defaults
Command Modes
Command History
Related
Commands
maximum-paths
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
neighbor
Syntax
498 | Routing Information Protocol (RIP)
ip rip receive version
version
Enable split-horizon for RIP data on the interface. As described in RFC 2453, the split-horizon scheme
prevents any routes learned over a specific interface to be sent back out that interface.
ip split-horizon
To disable split-horizon, enter no ip split-horizon.
Enabled
INTERFACE
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
ip poison-reverse
Set RIP to forward packets over multiple paths.
maximum-paths number
To return to the default values, use the no maximum-paths command.
number
Enter the number of paths.
Range: 1 to 16.
The default is 4 paths.
4
ROUTER RIP
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
RIP supports a maximum of 16 ECMP paths.
Define a neighbor router with which to exchange RIP information.
neighbor ip-address
To delete a neighbor setting, use the no neighbor
Sets the RIP version for the interface to receive traffic.
Sets the RIP version to be used for the switch software.
Sets the prefix for RIP routing updates.
ip-address command.