Dell Force10 MXL Blade Reference Manual page 678

Defaults
Command Mode
Command
History
Related
Commands
buffer (Configuration)
Parameters
678 | Debugging and Diagnostics
queue0
number
queue1
number
queue2
number
queue3
number
none
BUFFER PROFILE
H
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
buffer-profile (Configuration)
Apply a buffer profile to all Field or Switch Fabric processors in a port-pipe.
[ | ] port-set port-pipe buffer-policy buffer-profile
buffer csf fp-uplink
csf
fp-uplink
Enter this keyword to allocate an amount of buffer space or packet pointers
to Queue 0.
Dedicated Buffer Range: 0-2013
Dynamic Buffer Range:
FP: 0-2013
CSF: 0-131200 (in multiples of 80)
Packet Pointer Range: 0-2047
Enter this keyword to allocate an amount of buffer space or packet pointers
to Queue 1.
Dedicated Buffer Range: 0-2013
Dynamic Buffer Range:
FP: 0-2013
CSF: 0-131200 (in multiples of 80)
Packet Pointer Range: 0-2047
Enter this keyword to allocate an amount of buffer space or packet pointers
to Queue 2.
Dedicated Buffer Range: 0-2013
Dynamic Buffer Range:
FP: 0-2013
CSF: 0-131200 (in multiples of 80)
Packet Pointer Range: 0-2047
Enter this keyword to allocate an amount of buffer space or packet pointers
to Queue 3.
Dedicated Buffer Range: 0-2013
Dynamic Buffer Range:
FP: 0-2013
CSF: 0-131200 (in multiples of 80)
Packet Pointer Range: 0-2047
Creates a buffer profile that can be applied to an interface.
Enter this keyword to apply a buffer profile to all Switch Fabric processors
in a port-pipe.
Enter this keyword to apply a buffer profile to all Field Processors in a a
port-pipe.