Ip Ssh Password-Authentication; Ip Ssh Pub-Key-File - Dell Force10 MXL Blade Reference Manual

Command
Version 8.3.16.1
History
Usage The server-generated key is used for SSHv1 key-exchange.
Information

ip ssh password-authentication

Enable password authentication for the SSH server.
Syntax
ip ssh password-authentication enable
To disable password-authentication, use the no ip ssh password-authentication enable command.
Parameters
enable
Defaults Enabled
Command Modes
CONFIGURATION
Command
Version 8.3.16.1
History
Usage
With password authentication enabled, you can authenticate using local, RADIUS, or TACACS+
Information
password fallback order as configured.

ip ssh pub-key-file

Specify the file to be used for host-based authentication.
Syntax ip ssh pub-key-file
Parameters
WORD
Defaults none
Command Modes
CONFIGURATION
Command
Version 8.3.16.1
History
Figure 29-6. ip ssh pub-key-file Command Example
Example
FTOS#conf
FTOS(conf)# ip ssh pub-key-file flash://knownhosts
FTOS(conf)#
Introduced on MXL 10/40GbE Switch IO Module
enable
Enter the keyword to enable password-authentication for the SSH server.
Introduced on MXL 10/40GbE Switch IO Module
{ WORD }
Enter the file name for the host-based authentication.
Introduced on MXL 10/40GbE Switch IO Module
Security | 559