Match Metric; Match Route-Type - Dell Force10 MXL Blade Reference Manual

Related
Commands

match metric

Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands

match route-type

Syntax
Parameters
Defaults
Command Modes
136 | Access Control Lists (ACL)
match interface
match ip address
match ip next-hop
match metric
match route-type
match tag
Configure a filter to match on a specified value.
match metric metric-value
metric-value
Enter a value to match.
Range: zero (0) to 4294967295.
Not configured.
ROUTE-MAP
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
match interface
match ip address
match ip next-hop
match ip route-source
match route-type
match tag
Configure a filter to match routes based on the how the route is defined.
match route-type { external [ type-1 | type-2 ] | internal | local }
external type-1| type-2
[ ]
internal
local
Not configured.
ROUTE-MAP
Redistributes routes that match the next-hop interface.
Redistributes routes that match an IP address.
Redistributes routes that match the next-hop IP address.
Redistributes routes that match a specific metric.
Redistributes routes that match a route type.
Redistributes routes that match a specific tag.
Redistributes routes that match the next-hop interface.
Redistributes routes that match an IP address.
Redistributes routes that match the next-hop IP address.
Redistributes routes that match routes advertised by other routers.
Redistributes routes that match a route type.
Redistributes routes that match a specific tag.
external
Enter the keyword
match only on OSPF Type 1 routes or OSPF Type 2 routes.
internal
Enter the keyword
OSPF areas.
local
Enter the keyword
switch.
type-1
followed by either
to match only on routes generated within
to match only on routes generated within the
type-2
or to