Enable Password - Dell Force10 MXL Blade Reference Manual

Related
Commands
access-class
Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands

enable password

Syntax
Parameters
540 | Security
Connections to the SSH server works with the following login mechanisms: local, radius, and tacacs.
login authentication
password
radius-server host
tacacs-server host
Restrict incoming connections to a particular IP address in a defined IP access control list (ACL).
access-class access-list-name
To delete a setting, use the no access-class
access-list-name Enter the name of an established IP Standard ACL.
Not configured.
LINE
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
line
ip access-list standard
ip access-list extended
Change the password for the
enable password [ level level
To delete a password, use the
command.
level level
encryption-type
password
Applies an authentication method list to designated terminal lines.
Creates a password.
Specifies a RADIUS server host.
Specifies a TACACS+ server host.
command.
Applies an authentication method list to designated terminal lines.
Names (or selects) a standard access list to filter based on IP address.
Names (or selects) an extended access list based on IP addresses or protocols.
enable command.
] [ encryption-type ] password
no enable password [ encryption-type
(OPTIONAL) Enter the keyword
access.
Range: 1 to 15
(OPTIONAL) Enter the number
7
Enter a followed by a text string as the hidden password. The text string must
be a password that was already encrypted by a Dell Force10 router.
Use this parameter only with a password that you copied from the
running-config
file of another Dell Force10 router.
Enter a text string, up to 32 characters long, as the clear text password.
] password [ level level
level
followed by a number as the level of
7 0
or as the encryption type.
]
show