Debug Gvrp - Dell Force10 MXL Blade Reference Manual

Related
show gvrp statistics
Commands

debug gvrp

Enable debugging on GVRP.
Syntax debug gvrp { config | events | pdu }
To disable debugging, use the no debug gvrp { config | events | pdu } command.
Parameters
config
event
pdu
Defaults
Disabled
Command Modes EXEC Privilege
Command
Version 8.3.16.1
History
disable
Globally disable GVRP.
Syntax disable
To re-enable GVRP, use the no disable command.
Defaults Enabled
Command Modes
CONFIGURATION-GVRP
Command
Version 8.3.16.1
History
Related
gvrp enable
Commands
protocol gvrp
Displays the GVRP statistics
config
Enter the keyword to enable debugging on the GVRP configuration.
event
Enter the keyword to enable debugging on the JOIN/LEAVE events.
pdu
Enter the keyword followed one of the following Interface keywords and slot/port or
number information:
• For a Port Channel interface, enter the keyword
number: Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
slot/port information.
Introduced on MXL 10/40GbE Switch IO Module
Introduced on MXL 10/40GbE Switch IO Module
Enables GVRP on physical interfaces and LAGs.
Accesses the GVRP protocol.
port-channel
followed by a
TenGigabitEthernet
fortyGigE
followed by the
GARP VLAN Registration (GVRP) | 219