Common Mac Access List Commands; Clear Counters Mac Access-Group - Dell Force10 MXL Blade Reference Manual

Usage The order option is relevant in the context of the Policy QoS feature only. The following applies:
Information
•
•
•
•
•
If the sequence-number is configured, then the sequence-number is used as a tie breaker for rules
with the same order.
Related
deny
Commands
permit

Common MAC Access List Commands

The following commands are available within both MAC ACL modes (Standard and Extended) and do
not have mode-specific options.
The MXL 10/40GbE Switch IO Module platform supports both ingress and egress MAC ACLs.
The following commands allow you to clear, display and assign MAC ACL configurations.
•
•
•
•

clear counters mac access-group

Clear counters for all or a specific MAC ACL.
Syntax
clear counters mac access-group [ mac-list-name ]
Parameters
mac-list-name
Command Modes
EXEC Privilege
Command
Version 8.3.16.1
History
The seq sequence-number is applicable only in an ACL group.
The order option works across ACL groups that have been applied on an interface via QoS policy
framework.
The order option takes precedence over the seq sequence-number .
If sequence-number is not configured, then rules with the same order value are ordered
according to their configuration order.
If the sequence-number is configured, then the sequence-number is used as a tie breaker for
rules with the same order.
Configures a filter to drop packets.
Configures a filter to forward packets.
clear counters mac access-group
mac access-group
show mac access-lists
show mac accounting access-list
(OPTIONAL) Enter the name of a configured MAC access list.
Introduced on MXL 10/40GbE Switch IO Module
Access Control Lists (ACL) | 117