Debug Vrrp - Dell Force10 MXL Blade Reference Manual

debug vrrp

Allows you to enable debugging of VRRP.
Syntax debug vrrp interface [ vrrp-id ] { all | packets | state | timer }
To disable debugging, use the no debug vrrp interface [ vrrp-id ] { all | packets | state | timer }
command.
Parameters
interface
vrrp-id
all
bfd
packets
state
timer
Command Modes
EXEC Privilege
Command
Version 8.3.16.1
History
Usage If no options are specified, debug is active on all interfaces and all VRRP groups.
Information
description
Configure a short text string describing the VRRP group.
Syntax
description text
To delete a VRRP group description, use the no description command.
Parameters
text
Defaults Not enabled.
Command Modes VRRP
Command
Version 8.3.16.1
History
Enter the following keywords and slot/port or number information:
• For Port Channel interface types, enter the keyword
number:
Range: 1 to 128
• For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
• For a VLAN interface, enter the keyword
ID range is from 1 to 4094.
(OPTIONAL) Enter a number from 1 to 255 as the VRRP group ID.
all
Enter the keyword to enable debugging of all VRRP groups.
bfd
Enter the keyword to enable debugging of all VFFP BFD interactions
packets
Enter the keyword
state
Enter the keyword to enable debugging of VRRP state changes.
timer
Enter the keyword to enable debugging of the VRRP timer.
Introduced on MXL 10/40GbE Switch IO Module
Enter a text string up to 80 characters long.
Introduced on MXL 10/40GbE Switch IO Module
port-channel
vlan
followed by the VLAN ID. The VLAN
to enable debugging of VRRP control packets.
Virtual Router Redundancy Protocol (VRRP) | 665
followed by the
TenGigabitEthernet