Dell Force10 MXL Blade Reference Manual page 681

Example Figure 39-1. show buffer-profile Command Example
Related
buffer-profile (Configuration)
Commands
show buffer-profile interface
Display the buffer profile that is applied to an interface.
Syntax
show buffer-profile
Parameters
detail
summary
interface interface
slot/port
Defaults none
Command Mode
INTERFACE
Command H
Version 8.3.16.1
History
Figure 39-2. show buffer-profile interface Command Example
Example
Related
buffer-profile (Configuration)
Commands
FTOS#show buffer-profile summary fp-uplink
Stack Unit Port-set
0
4
FTOS#
{ detail | summary } interface interface slot/port
Introduced on MXL 10/40GbE Switch IO Module
FTOS#show buffer-profile detail csf linecard 4 port-set 0
Linecard 4 Port-set 0
Buffer-profile test
Queue# Dedicated Buffer
(Bytes)
0 36960
1 18560
2 18560
3 18560
4 9600
5 9600
6 9600
7 9600
FTOS#
Buffer-profile
0
0
Creates a buffer profile that can be applied to an interface.
Display the buffer allocations of a buffer profile.
Display the Field Processors and Switch Fabric Processors that are applied
in the system.
Enter the keyword interface followed by the interface type, either
tengigabitethernet or fortygigabitethernet
Enter the slot and port number of the interface.
Buffer Packets
718
358
358
358
64
64
64
63
Creates a buffer profile that can be applied to an interface.
test1
test2
.
Debugging and Diagnostics | 681