Set Metric; Set Metric-Type - Dell Force10 MXL Blade Reference Manual

set metric

Configure a filter to assign a new metric to redistributed routes.
Syntax set metric [ + | -] metric-value
To delete a setting, use the no set metric command.
Parameters
metric-value
Defaults Not configured
Command Modes
ROUTE-MAP
Command
Version 8.3.16.1
History
Related
set automatic-tag
Commands

set metric-type

set tag
set metric-type
Configure a filter to assign a new route type for routes redistributed to OSPF.
Syntax set metric-type { internal | external | type-1 | type-2 }
Parameters
internal
external
type-1
type-2
Defaults
Not configured.
Command Modes ROUTE-MAP
Command
Version 8.3.16.1
History
Related
set automatic-tag
Commands
set metric
set tag
+ (OPTIONAL) Enter + to add a metric-value to the redistributed routes.
- (OPTIONAL) Enter - to subtract a metric-value from the redistributed routes.
Enter a number as the new metric value.
Range: zero (0) to 4294967295
Introduced on MXL 10/40GbE Switch IO Module
Computes the tag value of the route.
Specifies the route type assigned to redistributed routes.
Specifies the tag assigned to redistributed routes.
Enter the keyword
hop as the route's BGP MULTI_EXIT_DES (MED) value.
Enter the keyword
Enter the keyword
Enter the keyword
Introduced on MXL 10/40GbE Switch IO Module
Computes the tag value of the route.
Specifies the metric value assigned to redistributed routes.
Specifies the tag assigned to redistributed routes.
internal
to assign the Interior Gateway Protocol metric of the next
external
to assign the IS-IS external metric.
type-1
to assign the OSPF Type 1 metric.
type-2
to assign the OSPF Type 2 metric.
Access Control Lists (ACL) | 139