Dell Force10 MXL Blade Reference Manual page 133

Match clause with Continue clause
The continue feature can exist without a match clause. A continue clause without a match clause
executes and jumps to the specified route-map entry.
With a match clause and a continue clause, the match clause executes first and the continue clause next
in a specified route map entry. The continue clause launches only after a successful match. The
behavior is:
•
•
•
Set clause with continue clause
If the route-map entry contains sets with the continue clause, set actions are performed first followed
by the continue clause jump to the specified route map entry.
•
•
Related
set metric
Commands
set automatic-tag
description
Add a description to this route map.
Syntax description { description }
Parameters
description
Defaults none
Command Modes
ROUTE-MAP
Command
Version 8.3.16.1
History
Related
route-map
Commands
A successful match with a continue clause, the route map executes the set clauses and then goes to
the specified route map entry upon execution of the continue clause.
If the next route map entry contains a continue clause, the route map executes the continue clause
if a successful match occurs.
If the next route map entry does not contain a continue clause, the route map evaluates normally. If
a match does not occur, the route map does not continue and falls through to the next sequence
number, if one exists.
If a set action occurs in the first route map entry and the same set action occurs with a different
value in a subsequent route map entry, the last set of actions overrides the previous set of actions
with the same set command.
If you configure the set community additive and set as-path prepend options, the communities
and AS numbers are prepended.
Enter a description to identify the route map (80 characters maximum).
Introduced on MXL 10/40GbE Switch IO Module
Specifies a COMMUNITY attribute
Configures a filter to modify the AS path
Enables a route map.
Access Control Lists (ACL) | 133