Ip Ospf Cost; Ip Ospf Authentication-Key - Dell Force10 MXL Blade Reference Manual

ip ospf authentication-key

Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information

ip ospf cost

Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands
398 | Open Shortest Path First (OSPFv2)
Enable authentication and set an authentication key on OSPF traffic on an interface.
ip ospf authentication-key [ encryption-type ] key
To delete an authentication key, use the no ip ospf authentication-key command.
encryption-type
(OPTIONAL) Enter 7 to encrypt the key.
key Enter an 8 character string. Strings longer than 8 characters are truncated.
Not configured.
INTERFACE
Version 8.3.16.1
All neighboring routers in the same network must use the same password to exchange OSPF
information.
Change the cost associated with the OSPF traffic on an interface.
ip ospf cost cost
To return to default value, use the no ip ospf cost command.
cost Enter a number as the cost.
Range: 1 to 65535.
The default cost is based on the reference bandwidth.
INTERFACE
Version 8.3.16.1
If this command is not configured, cost is based on the
When you configure OSPF over multiple vendors, use the
routers use the same cost. Otherwise, OSPF routes improperly.
auto-cost Controls how the OSPF interface cost is calculated.
Introduced on MXL 10/40GbE Switch IO Module
Introduced on MXL 10/40GbE Switch IO Module
auto-cost command.
ip ospf cost command to ensure that all