Dell Force10 MXL Blade Reference Manual page 587

Ftos command line reference guide for the mxl 10/40gbe switch io module
Hide thumbs Also See for Force10 MXL Blade:
Table of Contents

Advertisement

Parameters
group_name
1
auth
noauth
priv
read name
write name
notify name
access-list-name
Defaults
As defined above
Command Modes
CONFIGURATION
Command
Version 8.3.16.1
History
Usage
Figure 31-8
Information
encryption and read access limited to the read named rview .
Example
Figure 31-8. snmp-server group Command Example
FTOS#conf
FTOS(conf)# snmp-server group harig 3 priv read rview
FTOS#
|
2c | 3
Introduced on MXL 10/40GbE Switch IO Module
shows the group named harig as a version 3 user requiring both authentication and
Note:
The number of configurable groups is limited to 16 groups.
Enter a text string (up to 20 characters long) as the name of the group.
Defaults: The following groups are created for mapping to read/write
community/security-names.
v1v2creadg — maps to a community/security-name with
permissions
1v2cwriteg —
maps to a community/security-name
permissions
(OPTIONAL) Enter the security model version number (
1
is the least secure version
3
is the most secure of the security modes.
2c
allows transmission of informs and counter 64, which allows for
integers twice the width of what is normally allowed.
1
Default:
(OPTIONAL) Enter the keyword
without encryption.
(OPTIONAL) Enter the keyword
packet.
(OPTIONAL) Enter the keyword
then scrambling of the packet.
(OPTIONAL) Enter the keyword
20 characters long) as the read view name.
Default: GlobalView is set by default and is assumed to be every object
belonging to the Internet (1.3.6.1) OID space.
(OPTIONAL) Enter the keyword
20 characters long) as the write view name.
(OPTIONAL) Enter the keyword
to 20 characters long) as the notify view name.
(OPTIONAL) Enter the standard IPv4 access list name (a string up to 16
characters long).
Simple Network Management Protocol (SNMP) and Syslog | 587
1
2c
,
auth
to specify authentication of a packet
noauth
to specify no authentication of a
priv
to specify both authentication and
read
followed by a name (a string of up to
write
followed by a name (a string of up to
notify
followed by a name (a string of up
ro
rw
3)
, or
.

Advertisement

Table of Contents
loading

Table of Contents