Dell Force10 MXL Blade Reference Manual page 282

Example
282 | Interfaces
Figure 14-42. show interfaces port-channel Command Example (EtherScale)
FTOS#show interfaces port-channel
Port-channel 1 is down, line protocol is down
Hardware address is 00:1e:c9:f1:00:05, Current address is 00:1e:c9:f1:00:05
Interface index is 1107755009
Minimum number of links to bring Port-channel up is 1
Internet address is not set
Mode of IP Address Assignment : NONE
DHCP Client-ID :lag1001ec9f10005
MTU 1554 bytes, IP MTU 1500 bytes
LineSpeed auto
Members in this channel:
ARP type: ARPA, ARP Timeout 04:00:00
Last clearing of "show interface" counters 03:28:00
Queueing strategy: fifo
Input Statistics:
0 packets, 0 bytes
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
0 Multicasts, 0 Broadcasts
0 runts, 0 giants, 0 throttles
0 CRC, 0 overrun, 0 discarded
Output Statistics:
0 packets, 0 bytes, 0 underruns
0 64-byte pkts, 0 over 64-byte pkts, 0 over 127-byte pkts
0 over 255-byte pkts, 0 over 511-byte pkts, 0 over 1023-byte pkts
0 Multicasts, 0 Broadcasts, 0 Unicasts
0 throttles, 0 discarded, 0 collisions
Table 14-10. show interfaces port-channel Command Example Fields
Field
Port-Channel 1...
Hardware is...
Port-channel is part...
Internet address...
MTU 1554...
LineSpeed
Members in this...
ARP type:...
Last clearing...
Queueing strategy.
packets input...
Input 0 IP packets...
0 64-byte...
Received 0...
Description
Displays the LAG's status. In the example, the status of the LAG's LAG
fate-sharing group ("Failover-group") is listed.
Displays the interface's hardware information and its assigned MAC
address.
Indicates whether the LAG is part of a LAG fate-sharing group
("Failover-group").
States whether an IP address is assigned to the interface. If one is, that
address is displayed.
Displays link and IP MTU.
Displays the interface's line speed. For a port channel interface, it is the
line speed of the interfaces in the port channel.
Displays the interfaces belonging to this port channel.
Displays the ARP type and the ARP timeout value for the interface.
show interfaces
Displays the time when the
States the packet queuing strategy. FIFO means first in first out.
Displays the number of packets and bytes into the interface.
Displays the number of packets with IP headers, VLAN tagged headers
and MPLS headers.
The number of packets may not add correctly because a VLAN tagged IP
packet counts as both a VLAN packet and an IP packet.
Displays the size of packets and the number of those packets entering that
interface. This information is displayed over two lines.
Displays the type and number of errors or other specific packets received.
This information is displayed over three lines.
counters were cleared.