Set Automatic-Tag - Dell Force10 MXL Blade Reference Manual

Defaults
Command Modes
Command
History
Example
Usage
Information
Related
Commands

set automatic-tag

Syntax
Defaults
Command Modes
Command
History
Related
Commands
138 | Access Control Lists (ACL)
deny
sequence-number
Not configured
If no keyword ( permit or deny ) is defined for the route map, the permit action is the default.
CONFIGURATION
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
\
Figure 6-12. route-map Command Example
FTOS(conf)#route-map dempsey
FTOS(conf-route-map)#
Use caution when you delete route maps because if you do not specify a sequence number, all route
maps with the same map-name
show config Displays the current configuration.
Configure a filter to automatically compute the tag value of the route.
set automatic-tag
To return to the default, enter no set automatic-tag .
Not configured.
ROUTE-MAP
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
set metric Specifies the metric value assigned to redistributed routes.
set metric-type Specifies the metric type assigned to redistributed routes.
set tag Specifies the tag assigned to redistributed routes.
(OPTIONAL) Enter the keyword
(OPTIONAL) Enter a number to identify the route map for editing and sequencing
with other route maps. You are prompted for a sequence number if there are
multiple instances of the route map.
Range: 1 to 65535.
are deleted when you use no
deny
to set the route map default as deny.
route-map map-name command.