Defaults
Not configured.
Command Modes
INTERFACE VLAN
Command
Version 8.3.16.1
History
Usage
To display information about a named VLAN, enter the
Information
or the
Related
description
Commands
interface vlan
show vlan
show config
Display
Syntax
show config
Command Modes
INTERFACE VLAN
Example
Figure 18-5. show config Command Example for a Selected VLAN
FTOS(conf-if-vl-100)#show config
!
interface Vlan 1
FTOS(conf-if-vl-100)#
Command
Version 8.3.16.1
History
show vlan
Display
Syntax
show vlan [ brief | id vlan-id | name vlan-name ]
Parameters
brief
show interfaces description
Assigns a descriptive text string to the interface.
Configures a VLAN.
Displays the current VLAN configurations on the switch.
the current configuration of the selected VLAN.
description a
no ip address
mtu 2500
shutdown
the current VLAN configurations on the switch.
(OPTIONAL) Enter the keyword
•
VLAN ID
•
VLAN name (left blank if none is configured.)
•
Spanning Tree Group ID
•
MAC address aging time
•
IP address
Introduced on MXL 10/40GbE Switch IO Module
command.
Introduced on MXL 10/40GbE Switch IO Module
brief
to display the following information:
show vlan
command with the name parameter
Layer 2 | 349