Dell Force10 MXL Blade Reference Manual page 122

Defaults
Command Modes
Command
History
Related
Commands
seq
Syntax
Parameters
Defaults
Command Modes
Command
History
Related
Commands
122 | Access Control Lists (ACL)
count
byte
Not configured.
CONFIGURATION-MAC ACCESS LIST-STANDARD
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
deny Configures a MAC ACL filter to drop packets.
seq Configures a MAC ACL filter with a specified sequence number.
Assign a sequence number to a deny or permit filter in a MAC access list while creating the filter.
seq sequence-number { deny | permit } { any | mac-source-address [ mac-source-address-mask ]}
[ count [ byte ]]
sequence-number
deny
permit
any
mac-source-address
mac-source-address-mask
count
byte
Not configured.
CONFIGURATION-MAC ACCESS LIST-STANDARD
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
deny Configures a filter to drop packets.
permit Configures a filter to forward packets.
(OPTIONAL) Enter the keyword
by the filter.
(OPTIONAL) Enter the keyword
the filter.
Enter a number between 0 and 65535.
deny
Enter the keyword to configure a filter to drop packets meeting
this condition.
permit
Enter the keyword to configure a filter to forward packets
meeting this criteria.
any
Enter the keyword to filter all packets.
Enter a MAC address in nn:nn:nn:nn:nn:nn format.
(OPTIONAL) Specify which bits in the MAC address must match. If
no mask is specified, a mask of 00:00:00:00:00:00 is applied (in other
words, the filter allows only MAC addresses that match).
(OPTIONAL) Enter the keyword
by the filter.
(OPTIONAL) Enter the keyword
the filter.
count
to count packets processed
byte
to count bytes processed by
count
to count packets processed
byte
to count bytes processed by