Ip Ssh Key-Size - Dell Force10 MXL Blade Reference Manual

Command
History
ip ssh hostbased-authentication
Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
Related
Commands

ip ssh key-size

Syntax
Parameters
Defaults
Command Modes
558 | Security
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Enable hostbased-authentication for the SSHv2 server.
ip ssh hostbased-authentication enable
To disable hostbased-authentication for SSHv2 server, use the
enable command.
enable
Enter the keyword
Disable by default
CONFIGURATION
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
If you enable this command, clients can login without a password prompt. This provides two levels of
authentication:
• rhost-authentication is done with the file specified in the
• checking client host-keys is done with the file specified in the
If you execute no ip ssh rsa-authentication enable
Note:
Administrators must specify the two files (rhosts and pub-key-file) to configure
host-based authentication.
ip ssh pub-key-file
ip ssh rhostsfile
Configure the size of the server-generated RSA SSHv1 key.
ip ssh key-size 512-869
512-869
Key size 768
CONFIGURATION
enable
to enable hostbased-authentication for SSHv2 server.
, host-based authentication is disabled.
Public keys of trusted hosts from a file.
Trusted hosts and users for rhost authentication.
Enter the key-size number for the server-generated RSA SSHv1 key.
Range: 512 to 869
Default: 768
no ip ssh hostbased-authentication
ip ssh rhostfile command
ip ssh pub-key-file command