Dell Force10 MXL Blade Reference Manual page 610
Ftos command line reference guide for the mxl 10/40gbe switch io module
Hide thumbs
Also See for Force10 MXL Blade:
- Configuration manual (690 pages) ,
- Deployment manual (89 pages) ,
- Getting started manual (38 pages)
Table of Contents
Advertisement
storm-control unknown-unicast (Interface)
Syntax
Parameters
Defaults
Command Modes
Command
History
610
|
Storm Control
Configure the packets per second of unknown-unicast traffic allowed on a MXL Switch interface
(ingress only).
storm-control unknown-unicast [ packets_per_second ] in
To disable unknown-unicast storm control on the interface, use the no storm-control
unknown-unicast [ packets_per_second ] in command.
packets_per_second
none
INTERFACE (conf-if-interface-slot/port)
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module
Enter the packets per second of broadcast traffic allowed from the network.
Range: 0 to 33554368
Advertisement
Table of Contents
