Ip Directed-Broadcast; Ip Domain-List - Dell Force10 MXL Blade Reference Manual

ip directed-broadcast

Enables the interface to receive directed broadcast packets.
ip directed-broadcast
Syntax
To disable the interface from receiving directed broadcast packets, use the no ip directed-broadcast
command.
Defaults
Disabled (that is, the interface does not receive directed broadcast packets)
Command Modes INTERFACE
Command
Version 8.3.16.1
History

ip domain-list

Configure names to complete unqualified host names.
Syntax ip domain-list name
To remove the name, use the no ip domain-list name command.
Parameters
name
Defaults Disabled.
Command Modes
CONFIGURATION
Command
Version 8.3.16.1
History
Usage Configure the
Information
If both the
resolve the name using the
through the list of names configured with the
Use the following steps to enable dynamic resolution of hosts:
•
•
To view current bindings, use the
show running-config resolve
Related
ip domain-name
Commands
Introduced on MXL 10/40GbE Switch IO Module
Enter a domain name to be used to complete unqualified names (that is, incomplete
domain names that cannot be resolved).
Introduced on MXL 10/40GbE Switch IO Module
ip domain-list command up to 6 times to configure a list of possible domain names.
ip domain-name and
ip domain-name
specify a domain name server with the
enable DNS with the ip domain-lookup
command.
Specifies a DNS server.
ip domain-list commands are configured, the software will try to
command. If the name is not resolved, the software goes
ip domain-list
ip name-server
command.
show hosts command. To view DNS related configuration, use the
command to find a match.
command.
IPv4 Routing | 299