Default Logging Monitor; Default Logging Trap - Dell Force10 MXL Blade Reference Manual

default logging monitor

Syntax
Defaults
Command Modes
Command
History
Related
Commands

default logging trap

Syntax
Defaults
Command Modes
Command
History
Related
Commands
logging
Syntax
Parameters
Defaults
Command Modes
Command
History
596 | Simple Network Management Protocol (SNMP) and Syslog
Return to the default settings for messages logged to the terminal.
default logging monitor
level = 7 or debugging
CONFIGURATION
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
logging monitor
terminal monitor
Return to the default settings for logging messages to the Syslog servers.
default logging trap
level = 6 or informational
CONFIGURATION
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
logging trap Limits the messages logged to the Syslog servers based on severity.
Configure an IP address or host name of a Syslog server where logging messages will be sent. Multiple
logging servers of IPv4 can be configured.
logging { ipv4-address | hostname }
To disable logging, enter no logging .
ipv4-address
Enter an IPv4 address (A.B.C.D).
hostname Enter the name of a host already configured and recognized by the switch.
Disabled
CONFIGURATION
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Sets the logging monitor parameters.
Sends system messages to the terminal/monitor.