Other Commands Supported By Dhcp Client - Dell Force10 MXL Blade Reference Manual

Other Commands supported by DHCP Client

•
•
•
•
•
•
•
clear ip dhcp client statistics
Display DHCP client statistics, including the number of DHCP messages sent and received on an
interface.
Syntax clear ip dhcp client statistics {all | interface type slot/port }
Parameters
all
interface type slot/
port
Command Mode
EXEC Privilege
Default
None.
Command
Version 8.3.16.1
History
debug ip dhcp clients events
Enable the display of log messages for the following events on DHCP client interfaces:
•
•
•
•
Syntax debug ip dhcp client events [interface type slot/port]
Parameters
interface type slot/
port
clear ip dhcp client statistics
debug ip dhcp clients events
debug ip dhcp clients packets
release dhcp interface
renew dhcp interface
show ip dhcp client statistics
show ip dhcp lease
Clear DHCP client statistics on all DHCP client-enabled interfaces on the switch.
Clear DHCP client statistics on the specified interface.
For a 10-GigabitEthernet Ethernet interface, enter TenGigabitEthernet followed
by the slot/port numbers; for example, tengigabitethernet 1/3.
For a 40-GigabitEthernet Ethernet interface, enter FortyGigabitEthernet followed
by the slot/port numbers; for example, fortygigabitethernet 0/2.
Introduced on MXL 10/40GbE Switch IO Module
IP address acquisition
IP address release
Renewal of IP address and lease time
Release of an IP address
Display log messages for DHCP events on the specified interface.
For a 10-GigabitEthernet Ethernet interface, enter TenGigabitEthernet followed
by the slot/port numbers; for example, tengigabitethernet 1/3.
For a 40-GigabitEthernet Ethernet interface, enter FortyGigabitEthernet followed
by the slot/port numbers; for example, fortygigabitethernet 0/2.
Dynamic Host Configuration Protocol (DHCP) | 195