Distance Ospf - Dell Force10 MXL Blade Reference Manual

Parameters
Defaults
Command Modes
Command
History

distance ospf

Syntax
Parameters
Defaults
Command Modes
Command
History
Usage
Information
394 | Open Shortest Path First (OSPFv2)
weight
ip-address
mask
access-list-name
110
ROUTER OSPF
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Configure an OSPF distance metric for different types of routes.
distance ospf [ external dist3 ] [ inter-area dist2 ] [ intra-area dist1 ]
To delete these settings, use the no distance ospf command.
external dist3
inter-area dist2
intra-area dist1
external dist3 = 110; inter-area dist2 = 110; intra-area dist1 = 110.
ROUTER OSPF
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
o specify a distance for routes learned from other routing domains, use the
T
Specify an administrative distance.
Range: 1 to 255.
Default: 110
(OPTIONAL) Enter a router ID in the dotted decimal format.
If you enter a router ID, you must include the mask for that router address.
(OPTIONAL) Enter a mask in dotted decimal format or /n format.
(OPTIONAL) Enter the name of an IP standard access list, up to 140 characters.
(OPTIONAL) Enter the keyword
distance for external type 5 and 7 routes.
Range: 1 to 255
Default: 110.
(OPTIONAL) Enter the keyword
distance metric for routes between areas.
Range: 1 to 255
Default: 110.
(OPTIONAL) Enter the keyword
distance metric for all routes within an area.
Range: 1 to 255
Default: 110.
external
followed by a number to specify a
inter-area
followed by a number to specify a
intra-area
followed by a number to specify a
redistribute command.