Snmp-Server Trap-Source; Snmp-Server User - Dell Force10 MXL Blade Reference Manual

snmp-server trap-source

Configure a specific interface as the source for SNMP traffic.
Syntax snmp-server trap-source interface
To disable sending traps out a specific interface, use the no snmp trap-source command.
Parameter
interface
Defaults
The IP address assigned to the management interface is the default.
Command Modes CONFIGURATION
Command
Version 8.3.16.1
History
Usage
For this
Information
interface and enable the interface configured as an SNMP trap source.
Related
snmp-server community
Commands

snmp-server user

Configure a new user to an SNMP group.
Syntax snmp-server user name { group_name remote ip-address udp-port port-number } [ 1 | 2c | 3 ]
[ encrypted ] [ auth { md5 | sha } auth-password ] [ priv des56 priv password ] [access-list-name ]
To remove a user from the SNMP group, use the no snmp-server user name { group_name remote
ip-address udp-port port-number
des56 priv password ] [access-list-name ] command.
Parameters
name
group_name
remote ip-address
Enter the following keywords and slot/port or number information:
• For a Loopback interface, enter the keyword
number from 0 to 16383.
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
• For a 40-Gigabit Ethernet interface, enter the keyword
by the slot/port information.
Introduced on MXL 10/40GbE Switch IO Module
snmp-server trap-source command to be enabled, you must configure an IP address on the
Sets the community string.
} [ 1 | 2c | 3 ] [ encrypted ] [ auth { md5 | sha } auth-password ] [ priv
Enter the name of the user (not to exceed 20 characters), on the host, that
connects to the agent.
Enter a text string (up to 20 characters long) as the name of the group.
Defaults: The following groups are created for mapping to read/write
community/security-names.
• v1v2creadu — maps to a community with
v1v2cwriteu
•
Enter the keyword
the SNMP on the remote device.
followed by the slot/port information.
—
maps to a community
remote
followed by the IP address that identifies the copy of
Simple Network Management Protocol (SNMP) and Syslog | 591
loopback
followed by a
fortyGigE
followed
ro
permissions
rw
permissions