Dell Force10 MXL Blade Reference Manual page 256

Ftos command line reference guide for the mxl 10/40gbe switch io module

Hide thumbs Also See for Force10 MXL Blade:

Table of Contents

Version 8.3.16.1

Introduced on MXL 10/40GbE Switch IO Module

Figure 14-23. portmode hybrid Configuration Example

FTOS(conf)#interface tengig 0/20

FTOS(conf-if-te-0/20)#no shut

FTOS(conf-if-te-0/20)#portmode hybrid

FTOS(conf-if-te-0/20)#sw

FTOS(conf-if-te-0/20)#int vlan 10

FTOS(conf-if-vl-10)#tag tengig 0/20

FTOS(conf-if-vl-10)#int vlan 20

FTOS(conf-if-vl-20)#untag tengig 0/20

FTOS(conf-if-vl-20)#

Figure 14-23

sets a port as hybrid, makes the port a tagged member of VLAN 20, and an untagged

member of VLAN 10, which becomes the native VLAN of the port. The port will now accept:

untagged frames and classify them as VLAN 10 frames

VLAN 20 tagged frames

The next figure is an example show output with "Hybrid" as the newly added value for 802.1QTagged.

The options for this field are:

True—port is tagged

False—port is untagged

Hybrid—port accepts both tagged and untagged frames