Show Uplink-State-Group - Dell Force10 MXL Blade Reference Manual

Command
History
Example
Related
Commands

show uplink-state-group

Syntax
Parameters
Defaults
Command Modes
Command
History
650 | Uplink Failure Detection (UFD)
Version 8.3.16.1
Figure 36-2. show running-config uplink-state-group Command Example
FTOS#show running-config uplink-state-group
!
uplink-state-group 3
no enable
description Testing UFD feature
downstream disable links 2
downstream TenGigabitEthernet 0/1-2,5,9,11-12
upstream TenGigabitEthernet 0/3-4
show uplink-state-group
uplink-state-group
Display status information on a specified uplink-state group or all groups.
show uplink-state-group [group-id] [detail]
group-id
detail
none
EXEC
EXEC Privilege
Version 8.3.16.1
Introduced on MXL 10/40GbE Switch IO Module
Displays status information on a specified uplink-state group or all groups.
Creates an uplink-state group and enable the tracking of upstream links.
Displays status information on a specified uplink-state group or all
groups. Valid group-id values are 1 to 16.
Displays additional status information on the upstream and
downstream interfaces in each group
Introduced on MXL 10/40GbE Switch IO Module