Dell Force10 MXL Blade Reference Manual page 405
Ftos command line reference guide for the mxl 10/40gbe switch io module
Hide thumbs
Also See for Force10 MXL Blade:
- Configuration manual (690 pages) ,
- Deployment manual (89 pages) ,
- Getting started manual (38 pages)
Table of Contents
Advertisement
The default keyword sets all interfaces as passive. You can then configure individual interfaces, where
adjacencies are desired, using the no passive-interface interface command. The no form of this
command is inserted into the configuration for individual interfaces when the no passive-interface
interface
This command behavior has changed as follows:
passive-interface interface
•
•
•
passive-interface default
•
•
•
•
no passive-interface interface
•
•
•
No passive-interface default
•
•
•
redistribute
Redistribute information from another routing protocol throughout the OSPF process.
Syntax
redistribute { connected | rip | | ospf | static } [ metric metric-value | metric-type type-value ]
[ route-map map-name ] [ tag tag-value ]
To disable redistribution, use the no redistribute { connected | ospf | rip | static } command.
Parameters
connected
rip
ospf
static
metric metric-value
command is issued while passive-interface default is configured.
The previous no passive-interface interface is removed from the running configuration.
The ABR status for the router is updated.
Save passive-interface interface into the running configuration.
All present and future OSPF interface are marked as passive.
Any adjacency are explicitly terminated from all OSPF interfaces.
All previous passive-interface interface commands are removed from the running
configuration.
All previous no passive-interface interface commands are removed from the running
configuration.
Remove the interface from the passive list.
The ABR status for the router is updated.
If passive-interface default is specified, then save no passive-interface interface into the
running configuration.
Clear everything and revert to the default behavior.
All previously marked passive interfaces are removed.
May update ABR status.
Enter the keyword
on interfaces is redistributed.
Enter the keyword
Enter the keyword
Enter the keyword
redistributed.
(OPTIONAL) Enter the keyword
Range: 0 (zero) to 16777214.
connected
to specify that information from active routes
rip
to specify that RIP routing information is redistributed.
ospf
to specify that RIP routing information is redistributed.
static
to specify that information from static routes is
metric
followed by a number.
Open Shortest Path First (OSPFv2) | 405
Advertisement
Table of Contents
