online stack-unit
Place a stack unit in the online state.
Syntax
online stack-unit number
Parameters
number
Defaults
none
Command Mode
EXEC Privilege
Command
H
Version 8.3.16.1
History
Buffer Tuning Commands
The buffer tuning commands are:
•
•
•
•
•
•
Warning:
Altering the buffer allocations is a sensitive operation. Do not use any buffer tuning commands
without first contacting the Dell Force10 Technical Assistance Center (TAC).
buffer (Buffer Profile)
Allocate an amount of dedicated buffer space, dynamic buffer space, or packet pointers to queues 0 to
3.
Syntax
buffer
queue3 number
Parameters
dedicated
dynamic
packets-pointers
Introduced on MXL 10/40GbE Switch IO Module
buffer (Buffer Profile)
buffer (Configuration)
buffer-profile (Configuration)
buffer-profile (Interface)
show buffer-profile
show buffer-profile interface
[ dedicated | dynamic | packets-pointers ] queue0 number queue1 number queue2 number
Enter the stack unit number.
range: 0 to 5
Enter this keyword to configure the amount of dedicated buffer space per
queue.
Enter this keyword to configure the amount of dynamic buffer space per
Field Processor.
Enter this keyword to configure the number of packet pointers per queue.
Debugging and Diagnostics | 677