Show Interfaces Status - Dell Force10 MXL Blade Reference Manual

Related
show hardware stack-unit
Commands
show interfaces

show interfaces status

Display a summary of interface information or specify a stack unit and interface to display status
information for that specific interface only.
Syntax show interfaces [ interface | stack-unit unit-number ] status
Parameters
interface
Defaults none
Command Modes
EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
Example Figure 14-35. show interfaces status Command Example
FTOS#show interface status
Port
Te 0/1
Te 0/2
Te 0/3
Te 0/4
Te 0/5
Te 0/6
Te 0/7
Te 0/8
Te 0/9
Te 0/10
Te 0/11
Te 0/12
Te 0/13
Te 0/14
Te 0/15
Te 0/16
FTOS#
Related
show interfaces
Commands
Displays data plane and management plane input/output statistics.
Displays information on a specific physical interface or virtual interface.
(OPTIONAL) Enter one of the following keywords and slot/port or number
information:
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet
• For a 40-Gigabit Ethernet interface, enter the keyword
by the slot/port information.
Introduced on MXL 10/40GbE Switch IO Module
Description Status Speed
Down Auto
Down Auto
Down Auto
Down Auto
Down Auto
Down Auto
Down Auto
Up 10000 Mbit Full
Down Auto
Down Auto
Down Auto
Down Auto
Down Auto
Down Auto
Down Auto
Up 10000 Mbit Full
Displays information on a specific physical interface or virtual interface.
followed by the slot/port information.
Duplex Vlan
Auto --
Auto --
Auto --
Auto --
Auto --
Auto --
Auto --
--
Auto --
Auto --
Auto --
Auto --
Auto --
Auto --
Auto --
--
fortyGigE
followed
Interfaces | 267