Show Inventory - Dell Force10 MXL Blade Reference Manual

Ftos command line reference guide for the mxl 10/40gbe switch io module

Hide thumbs Also See for Force10 MXL Blade:

Table of Contents

show inventory

Displays the switch type, components (including media), FTOS version including hardware

identification numbers and configured protocols.

show inventory [media slot ]

Command Modes

Version 8.3.16.1

If there are no fibre ports in the unit, only the header under show inventory media is displayed. If

there are fibre ports but no optics inserted, the output displays the message "Media not present or

accessible".

Figure 4-16. show inventory for MXL 10/40GbE Switch IO Module Command Example

FTOS#show inventory

Software Version

--------------------------------------------------------------

Software Protocol Configured

--------------------------------------------------------------

Figure 4-17. show inventory media Command Example

FTOS#show inv media

-----------------------------------------------------------------------------

(OPTIONAL) Enter the keyword

for which you want to display pluggable media inventory.

Introduced on MXL 10/40GbE Switch IO Module

MXL-10/40GbE

* - Management Unit

: MXL-10/40GbE

: NAVASOTA-DEV-9-1-0-917

Serial Number

TW282921F00048 0NVH81

40GBASE-CR4-1M

Media not present or accessible

followed by the stack ID of the stack member

Serial Number

APF11490011J2Q

Control and Monitoring | 61