Show Ip Route Summary - Dell Force10 MXL Blade Reference Manual

Ftos command line reference guide for the mxl 10/40gbe switch io module
Hide thumbs Also See for Force10 MXL Blade:
Table of Contents

Advertisement

Parameters
prefix-list
Command Modes
EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
Related
ip prefix-list
Commands
show ip prefix-list summary
Example
Figure 15-19. show ip route summary Command Example
FTOS#show ip route list test
Codes: C - connected, S - static, R - RIP,
Gateway of last resort is not set

show ip route summary

View a table summarizing the IP routes in the switch.
Syntax
show ip route summary
Command Modes
EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
Enter the name of a configured prefix list.
Introduced on MXL 10/40GbE Switch IO Module
B - BGP, IN - internal BGP, EX - external BGP,LO - Locally Originated,
O - OSPF, IA - OSPF inter area, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type 2, E1 - OSPF external type 1,
E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1,
L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default,
> - non-active route, + - summary route
Destination
-----------
R
2.1.0.0/24
R
2.1.1.0/24
R
2.1.2.0/24
R
2.1.3.0/24
C
2.1.4.0/24
Introduced on MXL 10/40GbE Switch IO Module
Enters the CONFIGURATION-IP PREFIX-LIST mode and configure a
prefix list.
Displays a summary of the configured prefix lists.
Gateway
-------
via 2.1.4.1, TenGig 4/43
via 2.1.4.1, TenGig 4/43
via 2.1.4.1, TenGig 4/43
via 2.1.4.1, TenGig 4/43
Direct, TenGig 4/43
Dist/Metric Last Change
----------- -----------
120/2
3d0h
120/2
3d1h
120/1
3d0h
120/1
3d1h
0/0
3d1h
IPv4 Routing | 317

Advertisement

Table of Contents
loading

Table of Contents