Debug Ip Icmp - Dell Force10 MXL Blade Reference Manual
Ftos command line reference guide for the mxl 10/40gbe switch io module
Hide thumbs
Also See for Force10 MXL Blade:
- Configuration manual (690 pages) ,
- Deployment manual (89 pages) ,
- Getting started manual (38 pages)
Table of Contents
Advertisement
Example
Figure 15-1. debug ip dhcp Command Example
FTOS#debug ip dhcp
00:12:21 : %RELAY-I-PACKET: BOOTP REQUEST (Unicast) received at interface 113.3.3.17 BOOTP
Request, hops = 0, XID = 0xbf05140f, secs = 0, hwaddr = 00:60:CF:20:7B:8C, giaddr = 0.0.0.0
00:12:21 : %RELAY-I-BOOTREQUEST: Forwarded BOOTREQUEST for 00:60:CF:20:7B:8C to 14.4.4.2
00:12:26 : %RELAY-I-PACKET: BOOTP REQUEST (Unicast) received at interface 113.3.3.17 BOOTP
Request, hops = 0, XID = 0xbf05140f, secs = 5, hwaddr = 00:60:CF:20:7B:8C, giaddr = 0.0.0.0
00:12:26 : %RELAY-I-BOOTREQUEST: Forwarded BOOTREQUEST for 00:60:CF:20:7B:8C to 14.4.4.2
00:12:40 : %RELAY-I-PACKET: BOOTP REQUEST (Unicast) received at interface 113.3.3.17 BOOTP
Request, hops = 0, XID = 0xda4f9503, secs = 0, hwaddr = 00:60:CF:20:7B:8C, giaddr = 0.0.0.0
00:12:40 : %RELAY-I-BOOTREQUEST: Forwarded BOOTREQUEST for 00:60:CF:20:7B:8C to 14.4.4.2
00:12:42 : %RELAY-I-PACKET: BOOTP REPLY (Unicast) received at interface 14.4.4.1 BOOTP Reply,
hops = 0, XID = 0xda4f9503, secs = 0, hwaddr = 00:60:CF:20:7B:8C, giaddr = 113.3.3.17
00:12:42 : %RELAY-I-BOOTREPLY: Forwarded BOOTREPLY for 00:60:CF:20:7B:8C to 113.3.3.254
00:12:42 : %RELAY-I-PACKET: BOOTP REQUEST (Unicast) received at interface 113.3.3.17 BOOTP
Request, hops = 0, XID = 0xda4f9503, secs = 0, hwaddr = 00:60:CF:20:7B:8C, giaddr = 0.0.0.0
00:12:42 : %RELAY-I-BOOTREQUEST: Forwarded BOOTREQUEST for 00:60:CF:20:7B:8C to 14.4.4.2
00:12:42 : %RELAY-I-PACKET: BOOTP REPLY (Unicast) received at interface 14.4.4.1 BOOTP Reply,
hops = 0, XID = 0xda4f9503, secs = 0, hwaddr = 00:60:CF:20:7B:8C, giaddr = 113.3.3.17
00:12:42 : %RELAY-I-BOOTREPLY: Forwarded BOOTREPLY for 00:60:CF:20:7B:8C to 113.3.3.254
FTOS#
Related
Commands
ip helper-address
ip helper-address hop-count disable
debug ip icmp
View information on the internal control message protocol (ICMP).
Syntax
debug ip icmp [ interface ] [ count value ]
To disable debugging, use the no debug ip icmp command.
Parameters
interface
count value
Command Modes
EXEC Privilege
Command
Version 8.3.16.1
History
Specifies the destination broadcast or host address for the
DHCP server request.
Disables the hop-count increment for the DHCP relay agent.
(OPTIONAL) Enter the following keywords and slot/port or number information:
•
For the Management interface, enter the keyword
by the slot/port information. The slot range is 0 and the port range is 0.
•
For a Port Channel interface, enter the keyword
Range: 1-128
•
For a 10-Gigabit Ethernet interface, enter the keyword
followed by the slot/port information.
•
For a 40-Gigabit Ethernet interface, enter the keyword
slot/port information.
•
For VLAN, enter the keyword
(OPTIONAL) Enter the keyword
Range: 1 to 65534
Default: Infinity
Introduced on MXL 10/40GbE Switch IO Module
ManagementEthernet
port-channel
TenGigabitEthernet
fortyGigE
vlan
followed by a number from 1 to 4094.
count
followed by the count value.
followed
followed by a number:
followed by the
IPv4 Routing | 295
Advertisement
Table of Contents
