Show Startup-Config - Dell Force10 MXL Blade Reference Manual

Command Modes
Command
History
Example
Example
Usage
Information

show startup-config

Syntax
Command Modes
Command
History
32 | File Management
configured
status
EXEC Privilege
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Figure 3-9. show running-config Command Example (Partial)
FTOS#show running-config
Current Configuration ...
! Version E8-3-16-29
! Last configuration change at Thu Apr 26 19:19:21 2012 by admin
! Startup-config last updated at Thu Apr 26 19:19:04 2012 by default
!
boot system stack-unit 0 primary system: A:
boot system stack-unit 0 secondary tftp://10.11.200.241/dt-m1000e-5-c2
boot system gateway 10.11.209.254
!
redundancy auto-synchronize full
redundancy disable-auto-reboot stack-unit
!
redundancy disable-auto-reboot stack-unit 0
redundancy disable-auto-reboot stack-unit 1
redundancy disable-auto-reboot stack-unit 2
redundancy disable-auto-reboot stack-unit 5
!--More--
service timestamps log datetime
logging coredump stack-unit all
!
hostname FTOS
!
...
Figure 3-10. show running-config Command Example
FTOS#show running-config status
running-config bytes 4306, checksum 0x4D55EE70
startup-config bytes 4344, checksum 0x6472C5E
FTOS#
The status option allows you to display the size and checksum of the running configuration and the
startup configuration.
Display the startup configuration.
show startup-config
EXEC Privilege
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
(OPTIONAL) Enter the keyword
interfaces with non-default configurations only.
(OPTIONAL) Enter the keyword
running configuration and the start-up configuration.
configuration
to display line card
status
to display the checksum for the