advertise med location-identification
Configure the system to advertise a location identifier.
Syntax
advertise med location-identification
To return to the default, use the no advertise med location-identification { coordinate-based value |
civic-based value
Parameters
coordinate-based value
civic-based value
ecs-elin value
Defaults
unconfigured
Command Modes
CONFIGURATION (conf-lldp)
Command
Version 8.3.16.1
History
Usage
ECS — Emergency Call Service such as defined by TIA or National Emergency Numbering
Information
Association (NENA)
ELIN — Emergency Location Identification Number, a valid North America Numbering Plan format
telephone number supplied for ECS purposes.
Related
debug lldp interface
Commands
show lldp neighbors
show running-config lldp
advertise med power-via-mdi
Configure the system to advertise the Extended Power via MDI TLV.
Syntax
advertise med power-via-mdi
To return to the default, use the no advertise med power-via-mdi command.
Defaults
unconfigured
Command Modes
CONFIGURATION (conf-lldp)
Command
Version 8.3.16.1
History
Usage
Advertise the Extended Power via MDI on all ports that are connected to an 802.3af powered,
Information
LLDP-MED endpoint device.
{ coordinate-based value | civic-based value | ecs-elin value }
| ecs-elin value } command.
Enter the keyword
location in hexadecimal value of 16 bytes.
Enter the keyword
hexadecimal format.
Range: 6 to 255 bytes
Enter the keyword
Emergency Location Identification Number (
Range: 10 to 25 characters
Introduced on MXL 10/40GbE Switch IO Module
Debugs LLDP
Displays the LLDP neighbors
Displays the LLDP running configuration
Introduced on MXL 10/40GbE Switch IO Module
coordinate-based
followed by the coordinated based
civic-based
followed by the civic based location in
ecs-elin
followed by the Emergency Call Service (
elin
Link Layer Discovery Protocol (LLDP) | 365
ecs
)
) numeric location string.