Dell Force10 MXL Blade Reference Manual page 181

Table 9-4. show interfaces pfc summary Command Example Fields (continued)
Field Description
Remote is enabled, Operational status (enabled or disabled) of peer device for DCBX exchange of PFC
Priority list configuration with a list of the configured PFC priorities. Willing status of peer
Remote Willing Status is device for DCBX exchange (Willing bit received in PFC TLV): enabled or
enabled disabled.
Local is enabled DCBX operational status (enabled or disabled) with a list of the configured PFC
priorities.
Operational status (local Port state for current operational PFC configuration:
port)
•
•
•
PFC DCBX Oper status Operational status for the exchange of the PFC configuration on the local port:
match (up) or mismatch (down).
State Machine Type Type of state machine used for DCBX exchanges of the PFC parameters:
Feature - for legacy DCBX versions; Symmetric - for an IEEE version.
TLV Tx Status Status of the PFC TLV advertisements: enabled or disabled.
PFC Link Delay Link delay (in quanta) used to pause specified priority traffic.
Application Priority TLV: Status of FCoE advertisements in application priority TLVs from the local DCBX
FCOE TLV Tx Status port: enabled or disabled.
Application Priority TLV: Status of ISCSI advertisements in application priority TLVs from the local DCBX
SCSI TLV Tx Status port: enabled or disabled.
Application Priority TLV: Priority bitmap used by the local DCBX port in FCoE advertisements in application
Local FCOE Priority Map priority TLVs.
Application Priority TLV: Priority bitmap used by the local DCBX port in ISCSI advertisements in application
Local ISCSI Priority Map priority TLVs.
Application Priority TLV: Status of FCoE advertisements in application priority TLVs from the remote peer
Remote FCOE Priority port: enabled or disabled.
Map
Application Priority TLV: Status of iSCSI advertisements in application priority TLVs from the remote peer
Remote ISCSI Priority port: enabled or disabled.
Map
PFC TLV Statistics: Input Number of PFC TLVs received.
TLV pkts
PFC TLV Statistics: Number of PFC TLVs transmitted.
Output TLV pkts
PFC TLV Statistics: Error Number of PFC error packets received.
pkts
PFC TLV Statistics: Pause Number of PFC pause frames transmitted.
Tx pkts
PFC TLV Statistics: Pause Number of PFC pause frames received.
Rx pkts
Init: Local PFC configuration parameters were exchanged with the peer.
Recommend: Remote PFC configuration parameters were received from the
peer.
Internally propagated: PFC configuration parameters were received from the
configuration source.
Data Center Bridging | 181