Dell Force10 MXL Blade Reference Manual page 577

Command
Version 8.3.16.1
History
Example Figure 30-1. show sflow Command Example
FTOS##show sflow
sFlow services are disabled
Global default sampling rate: 32768
Global default counter polling interval: 20
Global extended information enabled: none
0 collectors configured
0 UDP packets exported
0 UDP packets dropped
0 sFlow samples collected
FTOS#
Usage
The dropEvent counter (sFlow samples dropped due to sub-sampling) shown in
Information
displays a value of zero.
show sflow stack-unit
Display the sFlow information on a stack unit.
Syntax show sflow stack-unit { unit number }
Parameters
unit number
Command Modes
EXEC
EXEC Privilege
Command
Version 8.3.16.1
History
Example Figure 30-2. show sflow stack unit Command Example
FTOS#show sflow stack-unit 1
Stack-Unit 1
UDP packets dropped
FTOS#
Introduced on MXL 10/40GbE Switch IO Module
(OPTIONAL) Enter a unit number to view information on the stack unit in that slot.
Range: 0 to 5.
Introduced on MXL 10/40GbE Switch IO Module
Samples rcvd from h/w
Total UDP packets exported
:0
:0
:0
Figure 30-1 always
sFlow | 577